status disk

Display the current disk usage information from the SMART monitoring service.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

status disk

Example

lunash:>status disk


===================== Hard Disk utilization =====================
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/sda5        8125880  108244   7581824   2% /
/dev/sda8       41153760 1159100  37881124   3% /usr
/dev/sda6        1998672   80204   1797228   5% /boot
/dev/sda12      57667680   53540  54661744   1% /home
/dev/sda9        3997376   86724   3684556   3% /var
/dev/sda7        3997376  118996   3652284   4% /tmp
/dev/sda10       1998672    6144   1871288   1% /var/tmp
/dev/sda13     231063860   61476 219241952   1% /var/audit
/dev/sda11      10190100   38916   9610512   1% /var/log
/dev/sda14      10190100   39160   9610268   1% /var/log/audit

===================== Hard Disk SMART Report =====================

=== START OF INFORMATION SECTION ===
Device Model:     HGST HUS726020ALE611
Serial Number:    N4G55WPS
LU WWN Device Id: 5 000cca 245c25bfa
Firmware Version: APGNV7J0
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       108
  3 Spin_Up_Time            0x0007   131   131   024    Pre-fail  Always       -       227 (Average 228)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       14
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   128   128   020    Pre-fail  Offline      -       18
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       4385
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       14
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       185
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       185
194 Temperature_Celsius     0x0002   206   206   000    Old_age   Always       -       29 (Min/Max 23/35)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged


Command Result : 0 (Success)

TIP   Context is important. The appearance of log entries is a starting point, that can prompt you to run status disk to see what is going on.

Hard disks are designed to easily handle failed sectors, map around them, and continue working without issue.

For the SMART Offline_Uncorrectable attribute, a number of 100 in the VALUE column indicates the Luna Network HSM 7 appliance's self-assessment that the internal hard disk remains in good health. This is valid whether the RAW_VALUE column for that attribute is zero or any quantity into the many hundreds - the hard disk is still working correctly.

If the VALUE for Offline_Uncorrectable begins to decrease below 100, then the numbers for RAW_VALUE would likely rise into the thousands, and in that situation you can contact Support for next steps.