Luna HSM Firmware 7.3.3

Luna HSM firmware 7.3.3 was released in July 2019. It includes bug fixes and security updates for FIPS certification.

>Download Luna HSM Firmware 7.3.3 (firmware-only secure package)

Refer to NIST certificate #3205 for FIPS 140-2 Level 3 certification:

Special Considerations for Multifactor Quorum-Authenticated Luna HSMs

Refer to the following table for special firmware 7.3.3 and 7.4.2 update procedures for multifactor quorum-authenticated HSMs. These procedures apply depending on what firmware version was used to create the application partitions.

Partition created in HSM at firmware version Procedure
7.0.3, 7.3.3 Normal firmware update procedure (see Updating the Luna HSM Firmware)
7.1.0, 7.2.0, 7.3.0, or 7.4.0
with HSM Policy 15 set to ON*
Normal firmware update procedure (see Updating the Luna HSM Firmware) - EXCEPT the Partition SO must reset the challenge secret(s) after the firmware update, so that partition objects become accessible again (see Resetting the Crypto Officer, Limited Crypto Officer, or Crypto User Credential).
7.1.0, 7.2.0, 7.3.0, 7.4.0, or 7.4.1
with HSM Policy 15 set to OFF*

1. Before updating firmware, back up your partition contents.

2.Update your HSM to firmware version 7.3.3 or 7.4.2.

3.Your existing partition is no longer accessible; re-initialize the existing partition.

4.Restore your partition objects from backup.

* By default, HSM Policy 15 is OFF. Turning Policy 15 ON is destructive.