partition show

Display a detailed list of accessible partitions with relevant information. This command outputs information about one or all partitions on the Luna Network HSM 7 appliance's internal HSM. It is not necessary to be logged in as HSM SO to execute this command.

For each partition that is present, the following information is displayed:

>Partition serial number

>Partition name

>Primary authentication status (activated or not)

>Partition auto-authenticate status

>User lock-out statue

>HSM serial number

>HSM label

>HSM firmware version

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

partition show [-partition <partition_name>] [-all]

Argument(s) Shortcut Description
-partition <partitionname> -p Specifies the name of the partition for which to display information. By default information about all partitions is shown. Obtain the partition name by using the partition list command.
-all -a All partitions

Pre-firmware-7.7.0 Example

lunash:>partition show


   Partition Name:                            partition1
   Partition SN:                              154438865289
   Partition Label:                           testpartition
   Partition SO     PIN To Be Changed:        no
   Partition SO     Zeroized:                 no
   Partition SO     Login Attempts Left:      10
   Crypto Officer   PIN To Be Changed:        no
   Crypto Officer   Locked Out:               no
   Crypto Officer   Login Attempts Left:      10
   Crypto User      PIN To Be Changed:        no
   Crypto User      Locked Out:               no
   Crypto User      Login Attempts Left:      10
   Legacy Domain Has Been Set:                no
   Partition Storage Information (Bytes):     Total=324096, Used=1232, Free=322864
   Partition Object Count:                    6


Command Result : 0 (Success)

Luna HSM Firmware 7.7.0 (and newer) V1 Partition Example

lunash:>partition show -partition v1par1


   Partition Name:                                    v1par1
   Partition SN:                                1238700701512
   Partition Label:                                          
   Partition Version:                                       1
   Partition SO is not initialized.
   Crypto Officer is not initialized.
   Crypto User is not initialized.
   Limited Crypto Officer is not initialized.
   Legacy Domain Has Been Set:                             no
   Partition Storage Information (Bytes):
                Total=6628214
                Used=0
                Free=6628214
   Partition Object Count:                                  0
   Partition SMK OUIDs:
		SMK-FW4: Not Initialized
		SMK-FW6: Not Initialized
		SMK-FW7-FM: Not Initialized
		SMK-FW7-Rollover: Not Initialized
		SMK-FW7-Primary: Not Initialized


Command Result : 0 (Success)

NOTE   If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.