sysconf snmp notification add
Add a single notification destination to be notified via the SNMP service.
User Privileges
Users with the following privileges can perform this command:
>Admin
>Operator
Syntax
sysconf snmp notification add -ipaddress <ipaddress> -authpassword <password> -privpassword <password> -secname <userid> [-authprotocol <protocol>] [-notifytype {trap | inform}] [-privprotocol <protocol>] [-udpport <port>] [-engineid <engineid>]
| Argument(s) | Shortcut | Description |
|---|---|---|
| -authpassword <password> | -authpa | Specifies the authentication password. The password may be 8-to-128 characters long. |
| -authprotocol <protocol> | -authpr |
Specifies the authentication protocol. Valid values: SHA Default: SHA |
| -engineid <engineid> | -e | Specifies the SNMP v3 Engine ID in hex numbers. The -engineid parameter is user-defined; set any hex number, omitting the 0x or 0X. Luna Network HSM 7 does not support dynamic discovery of the EngineID, once configured; ensure that you save or remember this value. |
| -ipaddress <ipaddress> | -i | Specifies the IPv4 address of the destination (a machine running snmptrapd from Net-SNMP or some other SNMP management application, such as MG-Soft's MIB Browser or HP's Openview.) |
| -notifytype <type> | -n |
Specifies the notification type. Valid values: trap: one-way unconfirmed notification inform: confirmed notification with retries Default: trap |
| -privpassword <password> | -privpa | Specifies the privacy password or encryption password. The password may be 8-to-128 characters long. |
| -privprotocol <protocol> | -privpr | Specifies the AES privacy protocol. |
| -secname <userid> | -s | Specifies the security name or user name for this user. The user name may be 1-to-31 characters. In the context of notifications this is the "Security Name" on whose behalf notifications are sent. |
| -udpport <port> | -u |
Specifies the UDP port on the notification target host to which notifications are sent. 162 is the SNMP default port for notifications. Default: 162 |
Example
lunash:>sysconf snmp notification add -ipaddress 10.124.0.87 -authpassword authPa$$w0rd -privpassword privPa$$w0rd -secname admin -engineid 0029403200 SNMP notification target information added Command Result : 0 (Success)
