ntls tcp_keepalive show

Display the NTLS TCP keep alive configuration.

TCPKeepAlive is a TCP stack option, available at the Luna HSM Client and the Luna Network HSM 7 appliance. It is controlled via an entry in the Luna HSM Client configuration file, and an equivalent file on the Luna Network HSM 7. On the Luna Network HSM 7 appliance, where you do not have direct access to the file system, the TCPKeepAlive= setting is controlled by lunash:> ntls tcp_keepalive set.
The settings at the appliance and the client are independent. This allows a level of assurance, in case (for example) a firewall setting blocks communication in one direction.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

ntls tcp_keepalive show

Example

lunash:>ntls tcp_keepalive show

NTLS TCP keepalive is configured as follows :

 TCP_KEEPIDLE  : 200
 TCP_KEEPINTVL : 150
 TCP_KEEPCNT   : 15


Command Result : 0 (Success)