partition showinfo

Display partition-level information for the current slot.

Syntax

partition showinfo

Examples

Partition Info for an application partition (pre-f/w 7.7)

lunacm:> partition showinfo

        Partition Label -> par0
        Partition Manufacturer -> Safenet, Inc.
        Partition Model -> LunaSA 7.0.0
        Partition Serial Number -> 154438865317
        Partition Status -> L3 Device
        HSM Part Number -> 808-000048-002
        Token Flags ->
                CKF_LOGIN_REQUIRED
                CKF_USER_PIN_INITIALIZED
                CKF_RESTORE_KEY_NOT_NEEDED
                CKF_TOKEN_INITIALIZED
        RPV Initialized -> Not Supported
        Slot Id -> 0
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in
        Token Flags ->
                TOKEN_KCV_CREATED
        Partition OUID: 01010000090000061b030100

        Partition Storage:
                Total Storage Space:  324096
                Used Storage Space:   0
                Free Storage Space:   324096
                Object Count:         0
                Overhead:             9648

        *** The partition is NOT in FIPS 140-2 approved operation mode. ***


Command Result : No Error 

Partition info for a V1 partition (f/w 7.7.0 or newer)

lunacm:> par si

        Partition Label -> myLunaPar
        Partition Manufacturer -> SafeNet
        Partition Model -> Luna K7
        Partition Serial Number -> 157956935656
        Partition Status -> L3 Device
        HSM Part Number -> 808-000073-002
        HSM Serial Number -> 67842
        Token Flags ->
                CKF_RNG
                CKF_LOGIN_REQUIRED
                CKF_USER_PIN_INITIALIZED
                CKF_RESTORE_KEY_NOT_NEEDED
                CKF_TOKEN_INITIALIZED
        RPV Initialized -> Not Supported
        Slot Id -> 23
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: 400000003600001402090100

        Extended Token Flags ->
                TOKEN_KCV_CREATED
        Partition OUID -> 200100003200001402090100

        Partition Storage:
                Total Storage Space:  49974882
                Used Storage Space:   56984
                Free Storage Space:   49917898
                Object Count:         34
                Overhead:             15560


        *** The Partition is NOT in FIPS 140-2 approved operation mode. ***

        FM HW Status -> FM Ready
        Firmware Version -> 7.7.0
        Bootloader Version ->  1.1.2
        Rollback Firmware Version -> 7.4.0

Command Result : No Error

NOTE   If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.