hsm rollbackfw

Roll back the HSM firmware to the previously installed version. Only the previously installed version is available for rollback. Rollback allows you to try a new firmware version without permanently committing to the new version.

CAUTION!   Firmware rollback is a destructive action; earlier firmware versions may have fewer or older mechanisms and might have security vulnerabilities that a newer version does not. Back up any important materials before running this command.

You must be logged in as HSM SO to use this command. The HSM must be re-initialized after a firmware rollback.

LunaCM performs an automatic restart following a firmware rollback.

NOTE   The hsm commands appear only when LunaCM's active slot is set to the administrative partition on a Luna PCIe HSM 7 or Luna USB HSM 7 or Luna Backup HSM. To access the HSM-level commands on Luna Network HSM 7, use LunaSH (see hsm).

Syntax

hsm rollbackfw

Example

lunacm:>role login -n so

        Please attend to the PED.

Command Result : No Error



lunacm:>hsm rollbackfw
        You are about to rollback the firmware to version 7.0.1.

        All objects will be destroyed.
        The User will be destroyed.
        The HSM will be reset.

        Are you sure you wish to continue?

        Type 'proceed' to continue, or 'quit' to quit now ->proceed

Rolling back firmware. This may take several minutes.

Firmware rollback passed. Resetting HSM

Command Result : No Error