partition showinfo

Display partition-level information for the current slot.

Syntax

partition showinfo

NOTE   The Partition Status field indicates the state of the partition. The value L3 Device means that the partition is following FIPS L3 guidelines. The other possible values are L3 Device, Tampered; L3 Device, Transport Mode; L3 Device, Zeroized; and L3 Device, Decommissioned. Each represents a possible partition state.

Examples

Partition info for a Luna USB HSM 7 partition

lunacm:> par si

        Slot Id -> 3
        Partition Label -> test009
        Partition Serial Number -> 1413122032003
        Partition Model -> Luna G7
        Partition Manufacturer ->
        Partition Status -> L3 Device, OK
        Partition OUID -> 8900001125000003eef50b00
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: Not Initialized


        Partition Storage:
                Total Storage Space:  32850448
                Used Storage Space:   0
                Free Storage Space:   32850448
                Object Count:         0
                Overhead:             24216

        System Times:
                HSM  : Wed Jul 01 15:27:01 UTC 2026
                Host : Wed Jul 01 16:22:09 UTC 2026
                Difference: 3308 sec

        Firmware Version -> 7.7.3
        Bootloader Version ->  1.6.0
        Rollback Firmware Version -> 7.7.2

        *** The HSM is in FIPS approved operation mode. ***

Command Result : No Error

NOTE    

>The System Times field does not appear until the HSM time has been synchronized with the host system using lunacm:> hsm time sync.

>If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.