hsm showinfo

Display HSM-level information.

NOTE   The hsm commands appear only when LunaCM's active slot is set to the administrative partition.

Syntax

hsm showinfo

Luna USB HSM 7 Example

lunacm:>hsm showinfo

        Slot Id -> 114
        Partition Label -> g7_backup
        Partition Serial Number -> 750332
        Partition Model -> Luna G7
        Partition Manufacturer ->
        Partition Status -> L3 Device, OK
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in
        RPV Initialized -> No

        Partition Cloning Version -> 1
        Partition FM Status -> FM Disabled

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: Not Initialized


        Partition Storage:
                Total Storage Space:  655360
                Used Storage Space:   0
                Free Storage Space:   655360
                Object Count:         0
                Overhead:             24408

        System Times:
                HSM  : Thu May 14 03:24:20 UTC 2026
                Host : Wed May 13 15:35:07 UTC 2026
                Difference: 42553 sec

        HSM Storage:
                Total Storage Space:  33816576
                Used Storage Space:   756384
                Free Storage Space:   33060192
                Allowed Partitions:   100
                Number of Partitions: 1

        HSM Part Number -> 808-000080-001

        Environmental:
                System Temperature :  42 deg. C

        Firmware Version -> 7.7.3
        Bootloader Version ->  1.6.0
        Rollback Firmware Version -> 7.7.2

        License Count:
                1. 621000247-000 G7 BU 32M Base Configuration (32MB/100Partitions)

        *** The HSM is NOT in FIPS approved operation mode. ***

Command Result : No Error

NOTE    

>The System Times field does not appear until the HSM time has been synchronized with the host system using lunacm:> hsm time sync.

>Starting with Luna HSM Firmware 7.7.0, this command reports 671120 bytes of overhead under HSM Storage after initialization.

>If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.

Luna Backup HSM 7 Example

lunacm:> hsm showinfo

        Slot Id -> 126
        Partition Label -> myG7pwd
        Partition Serial Number -> 596426
        Partition Model -> Luna G7
        Partition Manufacturer -> SafeNet
        Partition Status -> L3 Device, OK
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in
        RPV Initialized -> No

        Partition Cloning Version -> 1
        Partition FM Status -> FM Disabled

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: Not Initialized


        Partition Storage:
                Total Storage Space:  655360
                Used Storage Space:   0
                Free Storage Space:   655360
                Object Count:         0
                Overhead:             24224

        Firmware Version -> 7.7.1
        Bootloader Version ->  1.3.0
        Rollback Firmware Version -> 7.3.2
        HSM Part Number -> 808-000064-005

        HSM Storage:
                Total Storage Space:  33816576
                Used Storage Space:   761724
                Free Storage Space:   33054852
                Allowed Partitions:   100
                Number of Partitions: 3

        Environmental:
                System Temperature :  46 deg. C

        License Count:
                1. 621000121-000 G7 BU 32M Base CUF December 7 2018

        *** The HSM is NOT in FIPS 140-2 approved operation mode. ***

Command Result : No Error

NOTE    

>Starting with Luna Backup HSM 7 Firmware 7.7.1, this command reports 679584 bytes of overhead under HSM Storage after initialization.

>If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.