hsm showinfo
Display HSM-level information.
NOTE The hsm commands appear only when LunaCM's active slot is set to the administrative partition.
Syntax
hsm showinfo
Luna PCIe HSM Example
lunacm:> hsm showinfo
Partition Label -> myLunaPCIe
Partition Manufacturer -> SafeNet
Partition Model -> Luna K7
Partition Serial Number -> 67842
Partition Status -> L3 Device
HSM Part Number -> 808-000073-002
HSM Serial Number -> 67842
Token Flags ->
CKF_RNG
CKF_RESTORE_KEY_NOT_NEEDED
CKF_TOKEN_INITIALIZED
RPV Initialized -> Not Supported
Slot Id -> 24
Session State -> CKS_RW_PUBLIC_SESSION
Role Status -> none logged in
Partition SMK OUIDs:
SMK-FW4: Not Initialized
SMK-FW6: Not Initialized
SMK-FW7-FM: Not Initialized
SMK-FW7-Rollover: Not Initialized
SMK-FW7-Primary: Not Initialized
Extended Token Flags ->
TOKEN_KCV_CREATED
Partition OUID -> 000000000000000002090100
Partition Storage:
Total Storage Space: 655360
Used Storage Space: 0
Free Storage Space: 655360
Object Count: 0
Overhead: 15760
*** The HSM is in FIPS 140-2 approved operation mode. ***
FM HW Status -> FM Ready
Firmware Version -> 7.7.0
Bootloader Version -> 1.1.2
Rollback Firmware Version -> 7.4.0
Environmental:
Fan 1 Status : active
Fan 2 Status : active
Battery Voltage : 3.093 V
Battery Warning Threshold Voltage : 2.750 V
System Temp : 47 deg. C
System Temperature Warning Threshold : 75 deg. C
HSM Storage:
Total Storage Space: 67108864
Used Storage Space: 671120
Free Storage Space: 66437744
Allowed Partitions: 1
Number of Partitions: 0
License Count:
1. 621000068-000 Test Cert : K7 Base
2. 621010185-003 Key backup via cloning protocol
3. 621000135-002 Enable allow decommissioning
4. 621000134-002 Enable 64 megabytes of object storage
5. 621000154-001 Enable decommission on tamper with policy off
6. 621000021-002 Maximum performance
7. 621000138-001 Controlled tamper recovery
8. 621010199-003 Korean market cryptographic algorithms
Command Result : No Error
NOTE Starting with Luna HSM firmware 7.7.0, this command reports 671120 bytes of overhead under HSM Storage after initialization.
Luna G7 Backup HSM Example
lunacm:> hsm showinfo
Slot Id -> 126
Partition Label -> myG7pwd
Partition Serial Number -> 596426
Partition Model -> Luna G7
Partition Manufacturer -> SafeNet
Partition Status -> L3 Device, OK
Session State -> CKS_RW_PUBLIC_SESSION
Role Status -> none logged in
RPV Initialized -> No
Partition Cloning Version -> 1
Partition FM Status -> FM Disabled
Partition SMK OUIDs:
SMK-FW4: Not Initialized
SMK-FW6: Not Initialized
SMK-FW7-FM: Not Initialized
SMK-FW7-Rollover: Not Initialized
SMK-FW7-Primary: Not Initialized
Partition Storage:
Total Storage Space: 655360
Used Storage Space: 0
Free Storage Space: 655360
Object Count: 0
Overhead: 24224
Firmware Version -> 7.7.1
Bootloader Version -> 1.3.0
Rollback Firmware Version -> 7.3.2
HSM Part Number -> 808-000064-005
HSM Storage:
Total Storage Space: 33816576
Used Storage Space: 761724
Free Storage Space: 33054852
Allowed Partitions: 100
Number of Partitions: 3
Environmental:
System Temperature : 46 deg. C
License Count:
1. 621000121-000 G7 BU 32M Base CUF December 7 2018
*** The HSM is NOT in FIPS 140-2 approved operation mode. ***
Command Result : No Error
NOTE Starting with Luna G7 firmware 7.7.1, this command reports 679584 bytes of overhead under HSM Storage after initialization.