hsm show

Display a list showing the current configuration of the HSM.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

hsm show

Example

lunash:>hsm show


   Appliance Details:
   ==================
   Software Version:                7.7.0


   HSM Details:
   ============
   HSM Label:                          myLunaPED
   Serial #:                           532018
   Bootloader:                         1.1.2
   Firmware:                           7.7.0
   HSM Model:                          Luna K7
   HSM Part Number:                    808-000066-001
   Authentication Method:              PED keys
   HSM Admin login status:             Not Logged In
   HSM Admin login attempts left:      3 before HSM zeroization!
   RPV Initialized:                    Yes
   Audit Role Initialized:             No
   Remote Login Initialized:           No
   Manually Zeroized:                  No
   Secure Transport Mode:              No
   HSM Tamper State:                   No tamper(s)

   Partitions created on HSM:
   ==============================
   There are no partitions.


   Number of partitions allowed:        10
   Number of partitions created:        0

   FIPS 140-2 Operation:
   =====================
   The HSM is NOT in FIPS 140-2 approved operation mode.

   HSM Storage Information:
   ========================
   Maximum HSM Storage Space (Bytes):   67108864
   Space In Use (Bytes):                671120
   Free Space Left (Bytes):             66437744

   Environmental Information on HSM:
   =================================
   Battery Voltage:                     3.093 V
   Battery Warning Threshold Voltage:   2.750 V
   System Temp:                         46 deg. C
   System Temp Warning Threshold:       75 deg. C


   Functionality Module HW:            FM Ready
   =======================

Command Result : 0 (Success)

NOTE   Starting with Luna HSM firmware 7.7.0, this command reports "Space in Use" (example 671120) bytes of overhead, at the HSM Storage heading, after initialization.